When the "DVB Select Type" error appears, your Samsung TV is prompting you to specify which of these sources you are using. If the setting is wrong (e.g., set to Satellite but using an Antenna), the TV will show this error. Causes of DVB Select Type Error on Samsung TVs
If your TV cannot connect to the internet due to the setup loop, use a computer to download the latest firmware from the official Samsung Support website for your exact model number.
Sometimes the TV gets stuck trying to decode a digital broadcast signal when you actually intended to use an HDMI device. Press the button on your remote control.
The "DVB Select Type Error" on Samsung TVs typically occurs when the television's internal tuner fails to correctly identify or switch between digital broadcast standards (DVB-T, DVB-C, or DVB-S). This hardware-software mismatch often results in a "No Signal" message or a frozen setup screen. Core Causes of the Error
The "Broadcasting" and "Auto Tuning" menus are often only accessible when the TV is set to the correct source. button on your remote. Navigate to Connected Devices JustAnswer 2. Perform a Full Auto-Tune
: The signal being fed into the TV does not match the DVB type selected in the settings. Step-by-Step Troubleshooting Manual Tuning & Signal Reset : Navigate to Settings > All Settings > Broadcasting . Select Expert Settings > Manual Scan .
Temporary glitches in the DVB service handler can be resolved with a "soft reset." Soft Reset : While the TV is on, press and hold the
Outdated system software can cause compatibility issues with local digital broadcasting standards. Connect your TV to a stable Wi-Fi network. Go to > Support > Software Update . Select Update Now .
The "DVB Select Type" error on a Samsung TV typically occurs when the television's internal digital tuner (DVB) is set to the wrong signal type or is attempting to scan for channels on an incompatible input .
: If the coaxial wire is loose or severed, the tuner will abort the scan process and ask you to select a different type.
