A 3-pin or 9-pin RS232 cable compatible with your board's serial header.
: If the receiver won't boot, you will need a PC and an RS232 (null modem) cable to "flash" the firmware using a loader tool specific to the board's chipset. dvbs-evb-kd1100hd-v1.1 latest software
Note the date code often printed next to the version number. How to Download the Latest Software A 3-pin or 9-pin RS232 cable compatible with
The DVBS-EVB-KD1100HD-V1.1 is a widely used motherboard for high-definition digital satellite receivers. Keeping your firmware updated ensures better channel stability, improved hardware performance, and access to new features. Cross-connect the pins: TX to RX, RX to TX, and GND to GND
Connect these pins to a (like a CH340G or FTDI adapter) connected to your PC. Cross-connect the pins: TX to RX, RX to TX, and GND to GND.
| Component | Version Example 1 | Version Example 2 | | :--- | :--- | :--- | | | GS_V2.0 | SKN_S1_V2.0 or SKN_HD_Blue_v2.0 | | Firmware (FW) | 1_0_1677216_538248472 | 1_0_16777216_538248472 | | Bootloader (Main) | 0004 | 0004 | | Bootloader (Sub) | 0013 | 0013 |
: Ensure the software supports the specific tuner chip soldered to the board. How to Install