Replies with your system account properties: (IMEI number) and the default password. Enable GPRS Tracking Mode 102 or GPRS1,1
Once the cards are in, the indicator light (usually red) should flash or stay on briefly to indicate it is in standby mode. 2. Bind the Master Number
If "gpsuinet" refers to a GPS Utility (GPSU) or general GPS unit setup, use these configuration steps: gpsuinet setup
[Simulation] RepeatMode = Loop ; Loop or Once SpeedMultiplier = 1.0
Check that clients receive live NMEA sentences. On the server, monitor connections: Replies with your system account properties: (IMEI number)
What (receiver/gateway) you are using? Which industry or application is this system deployed for?
| Option | Description | Default Value | | :--- | :--- | :--- | | -n | Sets the CAN network number | 0 | | -s | Sets the baud rate for the serial line to the CAN hardware | 38400 | | module_name | Mandatory: the kernel module to load (e.g., plx_pci , slcan ) | | interface_name | The serial device (e.g., /dev/ttyUSB0 ) for slcan hardware | /dev/ttyUSB0 | Bind the Master Number If "gpsuinet" refers to
Many standalone trackers are configured by sending specific SMS codes to the phone number of the SIM card inside the device:
Choose how the GPSUINET system broadcasts data to your infrastructure: