If defaults don't work, look for a physical way to wipe the settings: Locate the Button: Look for a small pinhole or a recessed button labeled on the back or bottom of the DVR. Hard Reset:
Before opening up your hardware, test whether the system is running on native factory firmware settings. Many setups retain these credentials or return to them after an unexpected power trip. : admin | Password : (Leave blank/empty) Username : admin | Password : admin Username : admin | Password : 123456 Username : admin | Password : 888888 Username : admin | Password : 1234 Method 2: Use the Super Password Generator Utility
Go to the login screen and check the date displayed. It must be the exact date shown on the DVR. how to reset multistar dvr password full
Locate the barcode sticker on the bottom or back of your DVR chassis.
Before performing a hard reset, try the standard factory default login information often used by Multistar and similar H.264 DVR manufacturers: (Leave blank), admin, 123456, or 888888 2. Physical Hardware Reset If defaults don't work, look for a physical
Try leaving the password field completely blank , or enter 123456 , 888888 , 000000 , or admin . Method 2: The Super Password (Date-Based Generator)
Contact the distributor or manufacturer directly with your serial number to request a one-time unlock code. : admin | Password : (Leave blank/empty) Username
If software codes fail, you must perform a hard reset on the device's motherboard. Note that this may erase your settings, though it typically preserves existing recordings.