Kt 70 Installation Manual
Note: If your aircraft uses modern RS-232 serial data for altitude formatting, a serialization converter or an encoder that outputs parallel Gillham code is required for standard KT 70 legacy installations. 5. Antenna Installation and RF Cabling
Cause: A broken wire in the Gillham code harness, a misconfigured encoder, or a lack of power to the altitude encoder.
Verify that the altitude displayed on the ramp test equipment matches the aircraft’s primary altimeter within +/- 125 feet across the certified altitude spectrum. 4. RF Cable and Antenna Requirements Kt 70 Installation Manual
This consolidates manufacturer data, user experience, and technical specifications to help you install, configure, and troubleshoot your KT-70 display safely and effectively.
Connect to a compatible blind encoder (e.g., KEA 130A) or directly to an Air Data Computer (ADC). Note: If your aircraft uses modern RS-232 serial
Certified BendixKing dealers can provide professional installation and parts support.
: All RF connections must be crimped cleanly using professional-grade tools to avoid high standing wave ratios (VSWR). Suppression Bus Connection Verify that the altitude displayed on the ramp
2.2 Amps maximum at 14 VDC; 1.1 Amps maximum at 28 VDC. Receiver Frequency: 1030 MHz. Transmitter Frequency: 1090 MHz ± 1 MHz.
The BendixKing is a panel-mounted Mode S transponder designed for the Silver Crown series. While original physical manuals are often sold as vintage items on sites like GS Plane Stuff , digital versions are available through platforms like 1. General Specifications
A flawless installation relies entirely on the precision of the wire harness. The installation manual provides complete schematics detailing the specific pinout assignments on the rear connector block.
