Turn off the power switch on the NovaStar controller, wait 10 seconds, and turn it back on.
What or behavior are you seeing in NovaLCT or Device Manager? Share public link
For professionals managing LED display systems, ensuring a stable connection between the control computer and the NovaStar sending card (such as the MCTRL300, MCTRL600, or VX series) is critical. This connection often relies on the or USB-to-serial drivers to allow the NovaLCT software to communicate with the hardware. novastar mtp driver work
: Download the latest version of NovaLCT from the official NovaStar website . The MTP driver is usually bundled with the NovaLCT installer. 2. Standard Installation Process
NovaLCT software often scans only COM ports 1 through 8. If your driver installs on COM17, the software won't find it. Turn off the power switch on the NovaStar
If the automatic update fails, you can force install the driver via the INF file: Navigate to your Windows C:\Windows\INF folder. Locate wpdmtp.inf . Right-click wpdmtp.inf and select "Install". Restart your PC. 3. Alternative Solutions if MTP Driver Fails
Right-click the application and choose . Click Uninstall to wipe out the broken MTP configurations. This connection often relies on the or USB-to-serial
Use an Ethernet cable between your laptop and the TB series processor. Manually set your laptop IP to the same range (e.g., 192.168.1.101 , Subnet 255.255.255.0 ) to establish a connection via NovaLCT, bypassing the MTP USB issue.
When NovaLCT displays the dreaded "No hardware detected" or "Connection failed" error, the MTP driver or the USB communication line is usually broken. Here are the most frequent culprits:
Look for a device with a yellow exclamation mark (often under "Other Devices" or "Portable Devices"). Right-click the device and choose . Select Browse my computer for drivers .