Before we dive into the operating procedures and maintenance tips, let's review the technical specifications of the Sumitomo F50 compressor:
While the F50 is designed for reliability, it requires periodic maintenance. Some tasks are straightforward, while others should be left to specialists.
Connect the "Water In" and "Water Out" lines using flexible hoses to minimize vibration transfer. sumitomo f50 compressor manual new
: Water-cooled with an inlet temperature range of 4–28°C. Physical Footprint
The F50 relies heavily on a stable supply of cooling water to extract heat from the helium compression process. Before we dive into the operating procedures and
Proper installation protects the internal adsorber and scroll mechanism from premature failure. Follow these critical steps during unboxing and setup. Location and Environmental Requirements
Replace air filters and check oil filters. : Water-cooled with an inlet temperature range of 4–28°C
The Sumitomo F50 compressor boasts a range of impressive features, including:
Sumitomo F-50 is a mid-sized, water-cooled helium compressor used primarily in cryocooler systems for high-precision applications like Magnetic Resonance Imaging (MRI) and cryopumps. It is a replacement for older models like the CSW-71D, featuring an improved oil separator that extends the maintenance cycle to 30,000 hours. 1. Key Technical Specifications The F-50 is available in low-voltage ( ) and high-voltage ( ) variants to accommodate different regional power grids. SHI Cryogenics Group Specification Details Power Supply : 3-Phase 200V (50/60 Hz) : 3-Phase 380/400/415V (50 Hz) or 460/480V (60 Hz) Consumption 6.5–7.2 kW (50 Hz) to 7.5–8.3 kW (60 Hz) Cooling Water Flow rate of 4–10 L/min at 4–28°C (39–82°F). Never use demineralized water Dimensions 591 mm (H) x 450 mm (W) x 585 mm (D) Approximately 120 kg (264 lbs) Gas Pressure 2.30–2.35 MPaG (operating pressure varies by heat load) 2. System Components & Operation